Here are a few photos showing how the silver detail line was re-applied to the Steering Wheel center (rubber) insert. After cleaning the channel and removing all of the old paint, the entire recessed perimeter was taped off. This took over 3 hours to tape both sides of the channel. I used a round tipped, wooden skewer to help press the tape into place. The correct silver paint was them sprayed with an Air Brush. This method allowed the paint to be applied in a very calculated and controlled manner. After the paint cured and the tape was removed, the rubber was polished and buffed to look new again. Here are the final results.
You must log in to post a comment.