I’ve been posting pictures showing many of these small detailed components as individual units, prior to assembly. Below is a photo showing how some of these items appear in their final (assembled) configuration.

IMG_0647

NOS AM Chrysler Radio

Here are a couple of photos showing the NOS Chrysler Radio that was used for this project. It was the second Unit that had to be installed. The first one was also an NOS setup but did not work when it was removed from its original box. I ended up finding an identical replacement and it worked perfectly.

IMG_0258

IMG_0273

Here are a few pictures showing the Broadcast Sheets in place. We had about 14 printed and will use them in areas where they were found on Factory Cars. The great thing about these are that they are the original Broadcast Sheets to this Concept Vehicle. (lol)

IMG_0299

IMG_0298

IMG_0291

IMG_0304

Here is a photo of the Broadcast Sheet that we created for this Concept Tribute Vehicle. We decided to make approximately 6 to install throughout the Car. They will be placed in the same areas that the Factory originally installed them it. The Front Seat Back, top of Glove Box, Back Seat, etc……

IMG_0253

Here are a few pictures showing the alterations on the Rear Seat Bottom that had to be made for this Project. I had requested that the cushion be firm and for the material not to have any loose fitting spots. Those instructions were obviously ignored and we had to remove the covering to add additional padding to specific areas. Now the Rear Seat looks Factory original and no longer exhibits loose fitting material. Here are some “BEFORE & AFTER” photos of the work.

IMG_0209

IMG_0211

IMG_0213

IMG_0212

IMG_0225

IMG_0226

IMG_0227